PV.Cassettone.ROV B2 PF 20.40 Oak Panel/Birch Multilayer Back Support /2 Layers/Prefinished 20 mm/Top Layer 4 mm

Top layer

Single-plank noble layer in solid wood thickness 4 mm +/- 5%

Back support

Multilayer birch panel

Working – Finishes

Brushing, hand-planning, saw cutting, aging effect. Finished with varnish, oil or wax


20 mm


558.6 mm


558.6 mm


Made in Italy

Applicable codes

Uni en 14342 :2005+A1:2008


Floating or glued

Profiling and Connection

Tongue & groove 4 sides + bevel

Installation on underfloor heating system

Suitable (avoid surface temperature above 28º C. Refer to extended laying and maintenance instructions)

Cleaning and maintenance

Clean with vacuum cleaner or damp cloth well wrung, avoid cleaning with alcohol, solvents, ammonia based products
Cleaning: Easyclean
Maintenance: Easycare varnish


Use and maintenance instructions

The flooring must be stocked in dry environments. Laying must be carried out after installation of external doors and windows and once the plastering is fully dry, all other floorings and wall tiles must be already installed.
Environmental conditions: Temperature between 15 and 25ºC and humidity between 45% and 60%. Residual humidity of the subfloor (concrete screed) must be <2 %. In case of subflooring heating system installation must be carried out and only after its testing. Subflooring conditions must be previously verified (levelling, consistency, etc.)
Excesses of glue must be immediately removed by means of specific cleaning products, avoid covering the floor with rugs or furniture until flooring evening out. In case of accidental water or liquid spill mip as soon as possible.