Description
European Walnut Board/Fir Back Support /3 Layers/Prefinished 16 mm/Top Layer 4,5 mm
Top Layer
Single-plank noble layer in solid wood thickness 4,5 mm +/- 5%
Back Support
Special 2 layers fir panel manufactured by Latifoglia (Foglie d’oro)
Working – Finishes
Brushing, hand-planning, saw cutting, aging effect. Finished with varnish, oil or wax
Thickness
16 mm
Widths
120 < 300 mm
Lengths
800 < 2500 mm
Certification
Made in Italy
Applicable codes
Uni en 14342 :2005+A1:2008
Laying
Floating or glued
Profiling and Connection
Tongue & groove 4 sides + bevel
Installation on underfloor heating system
Suitable (avoid surface temperature above 28º C. Refer to extended laying and maintenance instructions)
Cleaning and maintenance
Clean with vacuum cleaner or damp cloth well wrung, avoid cleaning with alcohol, solvents, ammonia based products
Cleaning: Easyclean
Maintenance: Easycare varnish
Use and maintenance instructions
The flooring must be stocked in dry environments. Laying must be carried out after installation of external doors and windows and once the plastering is fully dry, all other floorings and wall tiles must be already installed.
Environmental conditions: Temperature between 15 and 25ºC and humidity between 45% and 60%. Residual humidity of the subfloor (concrete screed) must be <2 %. In case of subflooring heating system installation must be carried out and only after its testing. Subflooring conditions must be previously verified (levelling, consistency, etc.)
Excesses of glue must be immediately removed by means of specific cleaning products, avoid covering the floor with rugs or furniture until flooring evening out. In case of accidental water or liquid spill mip as soon as possible.
